[EnergyPlus_Support] control dampers

["David Cormier" <dcormier81@xxxxxxxxxxx>]

hello,

I have a second interrogation about the control of damper ... I model a 
central heating coil with a constant fan ... I want to have a damper in the 
zone and a big bypass that will take the flow that the damper will not take 
....

May I use SINGLE DUCT:CONST VOLUME or SINGLE DUCT:VAV ?

How the program proceed to choose if he open the damper or increase the coil 
production ?? How we can control that choice ??

(I look at the example files of vav ... I don't see damper control...)

thank you!

david cormier

_________________________________________________________________
MSN Messenger : discutez en direct avec vos amis !  
http://messenger.fr.msn.ca/



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
     EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/