[EnergyPlus_Support] check of my .idf

["markus_gmeinder" <markus_gmeinder@xxxxxx>]

Hi, 
Could somebody check my .idf file? (I uploded the .idf to the folder 
files)
I´m not shure if I did everything right. I created 4Zones. Zone 3+4 
are "Trombe Walls". As thermal heat storage material I integrated 
concrete, but I will replace the concrete with Phase Change 
Materials. The simulation should be without "big mistakes" because I 
use the results for my dissertation. 

What does the Zone/Sys Temperature exactly means?

Thanks for your time.
Markus




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
     EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/