[EnergyPlus_Support] Problems with autosizing

["Alberto Hernandez Neto" <ahneto@xxxxxx>]

Dear Sirs,

I was trying to use the purchased air option and I modified the example file PURCHASEAirAutosize. I checked a couple of times all the menus and it seemed to me that placed the right commands. Unfortunately , E+ did not finish the simulation and I got the following fatal error message:

For autosizing of PURCHASED AIR ARZONA01, a zone sizing run must be done.

I checked in the RunControl menu and I placed Yes for the option "do zone sizing ",as it is in the example file. What am I missing?

Thanks for any help.

Sincerely,



Alberto Hernandez Neto


[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
     EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/