[EnergyPlus_Support] which parameter or command in ADT is corresponding to the IFCstorey parameter?

[tandog tandog <tandogxy@xxxxxxxxxxxx>]

 hi,
I am testing the IFCtoIDF program.
but once I was drawing multi storey building.
I copy the ground floor three times to draw 3-story
building.
Then use IFC utility export the IFC file.

when i import the IFC to the ADT again, it is OK.
However, i use IFCtoIDF transfer the IFC file to IDF.
It will not work. When I open the DXF created by E+,
There are only one floor building.

So I think the something goes wrong on the definition
of building storey. but i don't know which parameter
or command in ADT is corresponding to the IFCstorey
parameter.

PS: the ADT version I am using is 2005 and 3.3

Thank U!!

Tandog


_________________________________________________________
Do You Yahoo!? 
嫌邮箱太小？雅虎电邮自助扩容！
http://cn.rd.yahoo.com/mail_cn/tag/10m/*http://cn.mail.yahoo.com/event/10m.html


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Yahoo! Domains - Claim yours for only $14.70
http://us.click.yahoo.com/Z1wmxD/DREIAA/yQLSAA/dkFolB/TM
---------------------------------------------------------------------~->

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
     EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/