[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Ventilation

Hello all,

I have a problem. I am simulating a comercial building
just to get cooling loads, so using purchased air.
This building is placed inside an atrium which indoor
air is maintaned at 25-26 ºC all year by an air system
i am not interested in. So, I have used other side
coefficient to indicate energyplus that my exterior
walls (except one) have a constant exterior air
temperature and film coefficient. But my problem is
that I need to define ventilation flow rates for my
zones, and this ventilation air is taken from the
surrounding environmet, so it is always air at 25-26
ºC. I don´t know how to define it since i am running a
whole year simulation with the Madrid weather file
(the building has got one facade facing outside
environment), so I presume the system is taking the
air at Madrid exterior temperature each time step,
which is not the real behaviour.

Any suggestions?

Thanks a lot. 


Renovamos el Correo Yahoo!: ¡100 MB GRATIS!
Nuevos servicios, más seguridad

------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: