[EnergyPlus_Support] a room facing North or South

[mby <bojic@xxxxxxxxx>]

Dear all,

My emerging problem is that I obtain that the room
facing north consumes more electricity for cooling
than that room facing south. Different facing is
obtained when the surface geometry key (in surface
geometry) is changed from absolute to relative  and
then degree in North axes (in location) changed to be
either 0 or 180. When I inspect my dxf file with
architectural desktop, I obtain the expected direction
of my building (room) (either north or south).
I am puzzled if the problem is in my interpretation of
geometry or else. 

Bojic  


		
__________________________________
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!
http://promotions.yahoo.com/new_mail


------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/