[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Solar Fluxes and building size.




At 10:27 AM 9/7/2004, sope_obadeyi@xxxxxxx wrote:
>Also , I find that the building volume calculated in EnergyPlus 157.52m3 is
>quite different from the value I have entered 125m3. The dimensions of the
>building are 10m by 5m by 2.5m. Upon simulating i find there is also an
>error saying the surface report had not been implemented?

I think you should "classify" your surface "floor1" as a floor and
"ceiling1" as a ceiling.  It is likely, then, that your volume warning will
go away.  It may change your solar flux issue as well -- I have not had
time to review the changes there as of yet.

For the "Surface report", you did not specify a type for the surface
report, two that I find useful are:

Report, Surfaces, DXF;
Report, Surfaces, Details;


Linda

EnergyPlus WebSite: http://www.energyplus.gov
Owner: EnergyPlus_Support list
Member: EnergyPlus Development Team



[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~-->
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~->

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/