[EnergyPlus_Support] simulate muti-story building?

["hbn_pch" <hbn_pch@xxxxxxxxxxxx>]

Hi all,
   i want to simulate 40-story building.Each floor has 5 zone.i 
divide the building to 3 floor to simulate,the ground floor,the top 
floor,and 2-38 as a floor with multiplier to calculate.I have a 
problem to describe the surfaces :the ground floor's surfaces can be 
described simply,but how to describe the mid-floor's surfaces?for 
example,how can i input the Z-coordinate of the mid-floor's floor or 
walls?
  if the mid-floor can't be described correctly,then i can't describe 
the top floor.
  Appreciated your kind help!  thanks
  
  pch





------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/