[EnergyPlus_Support] Re: comis : windows vertices

["ingdallolio" <ing.dallolio@xxxxxxxxx>]

Thanks Linda,
The version I used to run the case is the December 2004 one, but I 
wrote the imput file with the previous one.
I did write the openin vertices CCW direction but, I think, because 
of the fact the opening sides are not vertical and horizontal E+ do 
not "see" I'm going CCW ?? is that possible ?
I have now included in report all the air flow rates, all the 
openings have allways positive flow rates, what does that means ?
I uploaded the file.
Grazie.
Andrea.  


--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@l...> 
wrote:
> The "Base does not surround subsurface" is coming from the main 
EnergyPlus 
> and not because they are COMIS openings.  This usually means you 
have 
> overlapped the window with the base surface OR possibly that you 
have the 
> incorrect starting corner or direction (CW vs CCW) in specifying 
the 
> surface or window vertices.
> 
> I'm not sure what the COMIS Error is -- there should be some 
accompanying 
> message to say what it is complaining about.
> >>If I use 3 vertices windows still COMIS complain but do not make
> >>reference to those openings I just get :
> >>AN ERROR IS REPORTED (Comis)  ventilation OUTPUT IS LIKELY TO BE 
WRONG
> 
> Which EnergyPlus version are you using?
> 
> You may wish to upload your input file or send it to us for further 
detection.
> 
> At 02:42 AM 12/22/2004, ingdallolio wrote:
> >My walls upper rentilation openings on the est and west walls are
> >parallel to the roof slope, if I keep the openings rectangular  
COMIS
> >do not like that I get an error message:
> 
> Linda
> 
> EnergyPlus WebSite: http://www.energyplus.gov
> Owner: EnergyPlus_Support list
> Member: EnergyPlus Development Team
> 
> 
> 
> [Non-text portions of this message have been removed]





------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/