[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] How to deal with a wall which has different structures in different parts
apart from linda's suggestions
It can also be done in text editor. if you go into text editor mode or your input file and understand how walls are specified, then you could creat a similar wall object with the required dimensions and materials.
eg: replicate the object below from your idf with differnt names and the required XYZ coordinates in text editor and the same wall can have different materials then.
Surface:HeatTransfer,
Zn001:Wall007, !- User Supplied Surface Name
Wall, !- Surface Type
METALSIDINGWALL, !- Construction Name of the Surface
ZONE 1, !- InsideFaceEnvironment
ExteriorEnvironment, !- OutsideFaceEnvironment
, !- OutsideFaceEnvironment Object
SunExposed, !- Sun Exposure
WindExposed, !- Wind Exposure
0.5000000 , !- View Factor to Ground
4 , !- Number of Surface Vertex Groups -- Number of (X,Y,Z) groups in this surface
4.210000 , !- Vertex 1 X-coordinate {m}
71.14000 , !- Vertex 1 Y-coordinate {m}
5.500000 , !- Vertex 1 Z-coordinate {m}
4.210000 , !- Vertex 2 X-coordinate {m}
71.14000 , !- Vertex 2 Y-coordinate {m}
3.0000000E+00 , !- Vertex 2 Z-coordinate {m}
4.210001 , !- Vertex 3 X-coordinate {m}
51.14000 , !- Vertex 3 Y-coordinate {m}
3.0000000E+00 , !- Vertex 3 Z-coordinate {m}
4.210001 , !- Vertex 4 X-coordinate {m}
51.14000 , !- Vertex 4 Y-coordinate {m}
5.500000 ; !- Vertex 4 Z-coordinate {m}
mshirong <mshirong2003@xxxxxxxxxxxx> wrote:
Dear all,
I want to define a wall which has different structures in different parts. It is the exterior wall of a room.
But in E+, the surface has uniform temperature, so how to define the surfaces and structures? Could I divide the wall into a few parts?
looking forward to your reply!
Shirong Meng
---------------------------------
Do You Yahoo!?
150ÍòÇúMP3·è¿ñËÑ£¬´øÄú´³ÈëÒôÀÖµîÌÃ
ÃÀÅ®Ã÷ÐÇÓ¦Óо¡ÓУ¬ËѱéÃÀͼ¡¢ÑÞͼºÍ¿áͼ
1G¾ÍÊÇ1000Õ×£¬ÑÅ»¢µçÓÊ×ÔÖúÀ©ÈÝ£¡
[Non-text portions of this message have been removed]
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups SponsorADVERTISEMENT
---------------------------------
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Thanks
Rahul Chillar
Grad Student
Building Systems lab
Univ Of Illinois Urbana Champaign
---------------------------------
Do you Yahoo!?
The all-new My Yahoo! ? Get yours free!
[Non-text portions of this message have been removed]
------------------------ Yahoo! Groups Sponsor --------------------~-->
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~->
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/