[EnergyPlus_Support] Assisted Ventilation

["jms_dtz" <doutz4@xxxxxxx>]

I'm using the direct Air object given to a dummy zone and then mixed 
with the zone I need to simulate adding a separate air supply for 
ventilation.  I also use a completely different air loop for supply 
the direct air.  Within the dummy zone I need to define walls, is 
there a way to make the walls non heat transfer surfaces or does the 
direct air object not care about satisfying zone conditions?  This 
question is regarding the same problem I posted earlier about 100% 
outside air systems.





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/