Re: [EnergyPlus_Support] Help for the fluid loop

["Michael J. Witte" <mjwitte@xxxxxxxx>]

PLANT LOOPS and CONDENSER LOOPS are currently only liquid loops which do not 
model refrigerants.  Specific fluid properties are used by key components, but 
not by all.  REFRIGERANT properties are currently used only by the 
COIL:WaterToAirHP:Cooling and COIL:WaterToAirHP:Heating.

Mike


On 8 Mar 2005, at 6:02, energypluser wrote:

> 
> 
> Dear all,
> 
>      Is there a virtual loop for refrigerants in EnergyPlus? 
> How does the component obtain the fluid properties for simulation?
> Is there a routine included in every HVAC component specially for 
> the processing of the fluid properties? 
> 
> 
> Best wishes!
> 
> 
> 
> 
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> Attachments are not allowed -- please post any files to the appropriate folder
> in the Files area of the Support Web Site.
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 
> 
> 
> 
> 



========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/