[EnergyPlus_Support] Ventilation:Mechanical object

["jms_dtz" <doutz4@xxxxxxx>]

A question about the Ventilation:Mechanical object under the outdoor 
air controller.  I am using two primary air loops serving seperate 
zones, and have defined two mechanical ventilation objects.  I keep 
getting the warning saying,
"** Warning ** Zone name = DUMMYZN001 in VENTILATION:MECHANICAL 
object name = ASSIST is not on the same air loop as 
Controller:Outside air = OACONTROLLER2
   **   ~~~   ** This zone will not be used and the simulaiton will 
continue..."

I've checked and the zone DUMMYZN001 is connected to the same primary 
air object that OACONTROLLER2 is connected.  This loop happens also 
to be supplying direct air to the zones it's connected, but that is 
the only air loop object to those zones.  Is there something about 
the Ventilation:Mechanical object I'm missing?

Thanks





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/