[EnergyPlus_Support] About the autosize process and the examplefiles

["energypluser" <energypluser@xxxxxxxxxxxx>]

Dear All,

     Since E+ has the ability to do autosizing simulation for the 
HVAC system and Loads, I want to know that whether the autosizing 
results of the examples ,which have a "Auto" postfix 
(e.g.HeatpumpAuto ), are the data that input for the examples, which 
have the similar setup for the simulation except using the 
autosizing functions (e.g. HeatPump) ?
       
      3x in advance.
      
                                              charlie





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/