Re: [EnergyPlus_Support] About heatpump?

["Michael J. Witte" <mjwitte@xxxxxxxx>]

You might be able to make this work, but the heat pump is going to run to meet 
a load in the zone (the air side) and you will not be able to control the heat 
pump to meet a load on the water side.  Is the application for domestic hot 
water or for space heating?

Mike


On 15 Mar 2005, at 5:54, shirely213 wrote:

> 
> 
> Dear all: 
>   My heatpump system is AIR-WATER. That is, air is on the source 
> side and water is on the load side. It is opposite to WATER-AIR 
> heatpump which is found in IDD. So I think  if I can use the AIR-
> WATER heatpump in cooling status in winter as the WATER-AIR 
> heatpump ---Can this realize? Or should I make a module develope and 
> what should I do for this?
>   Think a lot!
> 
> 
> 
> 
> 
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> Attachments are not allowed -- please post any files to the appropriate folder
> in the Files area of the Support Web Site.
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 
> 
> 
> 
> 



========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/