[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] sos!
This is no longer a problem -- at least it will not fatal, but change the
design value, in V1.2.2
I believe there are more messages now, too, to help you decipher the problem.
** Warning ** The design coil load is zero for COIL:Water:Cooling COIL-ZONE
** ~~~ ** The autosize value for max water flow rate is zero
** Warning ** The design air volume flow rate is zero for
** ~~~ ** The autosize value for max air volume flow rate is zero
** Warning ** SizeWaterCoil: Coil="COIL-ZONE", Cooling Coil has leaving
humidity ratio > entering humidity ratio.
** ~~~ ** ..will be sized for 50% of design entering humidity ratio.
so, you need to register and download the new version.
EnergyPlus WebSite: http://www.energyplus.gov
Owner: EnergyPlus_Support list
Member: EnergyPlus Development Team
[Non-text portions of this message have been removed]
The primary EnergyPlus web site is found at:
The group web site is:
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to: