[EnergyPlus_Support] About the evaporator outlet temp of electric chiller

["energypluser" <energypluser@xxxxxxxxxxxx>]

Dear all:

   I set the chiller evaporator outlet node for the Loop Temperature 
Setpoint Node in Plant-Condenser Loops. And the setpoint manager for 
this node is a dual setpoint manager with the low and high scheduled 
temperature at 7C and 13C for all days respectively.  
  The purpose of using this setpoint manager is to let the chilled 
water outlet temperature varies between the deadband. But the 
simulation results show that the chiller supply temperature is 10C, 
which is the average value of the upper and lower temperature limit.
  Is E+ able to control the chiller water supply temperature in this 
way? 
  Thank you in advance!

                                                      charlie
     




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/