[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: WaterToWater HeatPump

Dear Andrea,
  i simulate at version 1.21 and i'v solved the problem with Sankar's 
help.Message 4494 perhaps is availale for you.

  Good luck.
  pch


--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "ingdallolio" 
<ing.dallolio@l...> wrote:
> All,
> I'm having the same error message from E+ 1.22 with my input file, 
> the input file was mostly generated with E+ 1.21, I went back to 
1.21 
> and it runs, I succesfully transitioned my input file bui 1.22 
still 
> crash.
> hbn_pch, what version are you running ?
> Thank for your help.
> Andrea.    
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "hbn_pch" <hbn_pch@y...> 
> wrote:
> > Dear,
> >   I'm now simulating a WaterToWater Heatpump system.There is a 
> severe 
> > while running the Ep-Lanch:
> > 
> > ** Severe  ** Inlet parameters for plant demand side splitter are 
> not 
> > physically possible
> >    **   ~~~   ** Problem in input for plant demand side CHILLED 
> WATER 
> > LOOP
> >    **   ~~~   ** The maximum flow out of the splitter is less 
than 
> > the minimum inlet flow
> >    **   ~~~   ** Flow rate inputs for the loop do not match flow 
> > requirements of the various branches/components
> >    **   ~~~   ** Check your flow rates and make sure that flow 
> > balances between the splitter inlet and outlets
> >    **  Fatal  ** EnergyPlus terminated due to reason stated above
> > 
> >   I've uploaded the .idf named WaterToWater HeatPump.
> > 
> >   Thanks in advance.
> >   PCH




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/