[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] DX Cooling and heating Coil Inputs

Hi there,

Some of the inputs for DX heating and cooling coils include Capacity, 
rated COP and rated air volume flow rate. The InputOutputReference 
document states that these inputs must be at particular rated 
conditions. 

What if the specifications I have are taken at different rated 
conditions ?  Is there any way i can adjust for this in EnergyPlus ?

Thanks,

Dan




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/