[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] COMIS

Dear all,

While using COMIS I wanted to define a minimum flow rate for the 
building. In order to achieve this I created a COMIS AIR FLOW:Crack 
object like this:

Name: Vent
Air mass flow coefficient: 0.025
Air mass flow exponent: 0.0
Crack length: 1

When looking at Infiltration-Air Change Rate report I was hoping to get 
a minimum ach related to 0.025. As I'm getting ach values below what I 
was expecting I don´t know what to make of it.

Thank you for help,
Alexandre

PS - Everybody thinking abou taking a vacation in Portugal, the weather 
is great!




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/