[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] How to get Fresh air volume/Air change rate?

This is not a computed report variable.  If you report the volume flow rate at 
the outside air inlet node (System Node VolFlowRate) for the system and the 
supply air volume flow rate to each zone, then you can calculate this by 
propotioning the total outside air flow rate by the individual zone supply flow 
rates.  

Mike


On 20 Jun 2005, at 8:24, eplus2005 wrote:

> Dear,
>    As we know,there is some standard value for fresh air volume or air 
> change rate of a zone for different conditions.I want to get the actual 
> values of the zones.And then i can compare these values with standard.
>    But i can't find the values in the results.How to get it?
> 
>   thanks in advance!
> 
> 
> 
> 
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> Attachments are not allowed -- please post any files to the appropriate folder
> in the Files area of the Support Web Site.
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 
> 
> 
> 



========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/