[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Questions

Hi All,
 
I am simulating a five zone building with VAV reheat system. I have several questions that I could not understand how to tackle it. These questions are as follows:
 
          1. VAV system outlet temperatures sated as default between 12 to 18 C. How would be
              zones heated if maximum is 18 and the zone set point temperature is 20 C?
 
          2. In Unitary DX System:Air loop the cooling coil is only specified what a bout the 
              heating coil? Is heating coil using same spec. of the cooling coil?
 
          3. If there are nodes which are not referenced, Is this node not integrated with system?
 
         4. Which report variables that can be used to show the daylighting effects? 
 
         5. What is the best lighting design level of office building per meter squares?
 
Thanks in advance.
 
Ali 



		
---------------------------------
How much free photo storage do you get? Store your holiday snaps for FREE with Yahoo! Photos. Get Yahoo! Photos

[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/