[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [EnergyPlus_Support] HEAT EXCHANGER:AIR TO AIR:FLAT PLATE in zone equipment
Max,
I think the availability of the choice in ZONE EQUIPMENT LIST is for a stand-alone, single-zone configurations and doesn't apply to your air system.
The HRV's are usually in the outside air system (toward the outside from the mixer). You may be in uncharted territory trying a more exotic location.
Brent
-----Original Message-----
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx]On Behalf Of massimiliano_scarpa
Sent: Tuesday, July 12, 2005 9:20 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] HEAT EXCHANGER:AIR TO AIR:FLAT PLATE in zone equipment
Good day to You all!
I'd like to simulate an air loop in which a HEAT EXCHANGER:AIR TO
AIR:FLAT PLATE comes after a ZONE PLENUM. Since the HEAT
EXCHANGER:AIR TO AIR:FLAT PLATE is among the available choices in
ZONE EQUIPMENT LIST, I hope it can be used it as an air distribution
unit, such as DIRECT AIR or VAV. But it seems like it is not
accepted as a part of the air loop, since I continue to receive
Severe errors about node connections. In particular, I wonder
whether:
1) The supply part of the HEAT EXCHANGER:AIR TO AIR:FLAT PLATE can
be used in the air loop, especially in the zone equipment part;
2) The secondary part of the HEAT EXCHANGER:AIR TO AIR:FLAT PLATE
can be placed:
- Between a zone and the return air path (I think it is not
possible);
- At the beginning of the air primary loop, that is just after the
air path;
- In the OUTSIDE AIR SYSTEM.
Last question: Which components can be placed between a zone plenum
and a zone splitter?
Thank You in advance
Have a good time
Max
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
<?---- LSpots keywords ?><?---- HM ADS ?>
_____
YAHOO! GROUPS LINKS
* Visit your group " EnergyPlus_Support <http://groups.yahoo.com/group/EnergyPlus_Support> " on the web.
* To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx <mailto:EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
_____
[Non-text portions of this message have been removed]
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/