[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] big zones - voids?
Yesterday's response to similar question:
>You may model with a ficticious material (maybe r only) or leave out
>those "walls" and just use floor and ceiling in interior zones. You
>will get a warning that your zone does not have 6 surfaces/enclosure
>though (if you leave out the interior walls). You also can just use
>constructions with R values for those
>interior walls. Something appropriate but small R value.
At 12:17 PM 8/8/2005, Clarice Bleil de Souza wrote:
>I would like to know if there is a way to model a void between 2 zones in E+.
>How does it account for the heat exchange between the zones that are
>separated by voids (no heat transfer surfaces - only air) ?
>
If the zones are all conditioned at the same temperature, basically
there is no "heat exchange" between zones. One should account for
the thermal interior mass (e.g. furniture, partitions, etc) by
including internal mass objects.
Linda
EnergyPlus WebSite: http://www.energyplus.gov
Owner: EnergyPlus_Support list
Member: EnergyPlus Development Team
[Non-text portions of this message have been removed]
------------------------ Yahoo! Groups Sponsor --------------------~-->
<font face=arial size=-1><a href="http://us.ard.yahoo.com/SIG=12hghqabu/M=362335.6886445.7839731.1510227/D=groups/S=1705007389:TM/Y=YAHOO/EXP=1123533195/A=2894361/R=0/SIG=13jmebhbo/*http://www.networkforgood.org/topics/education/digitaldivide/?source=YAHOO&cmpgn=GRP&RTP=http://groups.yahoo.com/";>In low income neighborhoods, 84% do not own computers. At Network for Good, help bridge the Digital Divide!</a>.</font>
--------------------------------------------------------------------~->
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/