[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Induced air terminal unit



Hi,

I am wondering how the induced air terminal unit SINGLE DUCT:CONST 
VOLUME:4 PIPE INDUC is autosized. 

I have a setpoint for the primary supply air temperature, but the 
primary air flow is set as "autosize". The heating and cooling coils 
in the unit are also set as "autosize". I am not sure how EnergyPlus 
determines the supply air flow when the actual supply air temperature 
(different from the primary supply air temperature) is unknown. 

In my simulation, the heating water flow is autosized as a negative 
number, which really confuses me. 

In addition, I ran the example file 5ZoneFPIU.idf, but no HVAC system 
diagram was generated. The .svg file says there is error in the input 
file. 

I will really appreciate if anyone can help me out here. 

-Chaoqin





------------------------ Yahoo! Groups Sponsor --------------------~--> 
Most low income households are not online. Help bridge the digital divide today!
http://us.click.yahoo.com/cd_AJB/QnQLAA/TtwFAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/