[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] autosizing X user specified


Hi everybody,

 

I want to model only a building plus its secondary system in E+ (air and zone equipment loops) and set the plant to be autosized. I was checking the possibilities of doing it in the Input/Output documentation and got a bit confused about it. As far as I understood I can do it but I need to specify the zone and the system in the Design Object Group anyway - overwriting parameters that  supppose to be autosized with the ones I have calculated - is that correct?

 

Thanks a lot in advance for the help,

 

Regards,

 

Clarice

		
---------------------------------
 Yahoo! Acesso Grátis: Internet rápida e grátis.
Instale o discador agora!

[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/A77XvD/vlQLAA/TtwFAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/