Re: [EnergyPlus_Support] FanCoils specification

[fred buhl <wfbuhl@xxxxxxx>]

Just use a 4 pipe fan coil and schedule the hot water coils off. The hot 
water coils will need to
be in the input and fully hooked up to a hot water loop.

Fred Buhl

Clarice Bleil de Souza wrote:

>Hi everybody,
>   
>  Just 2 quick questions about fancoil units.
>   
>  1) I want to model a 2 pipe FanCoil unit and could not find any specification of it in the Zone forced air units. Do I use a 4 pipe unit and ignore the heating part? Or do I specify parameters for it simulating the effect of the heating always off?
>   
>  2) In case of a cooling only FanCoil, wouldn't the Coil Air Outlet Node, the FanCoil Air Outlet Node and the Zone Air Inlet Node be the same one? I noticed that in the FanCoil autosize example the FanCoil Air Outlet Node is the same as the Zone Air Inlet Node, but the Coil Air Outlet Node is set to sth else, and I  could not find a connection for it. Can anybody give me a light on that?
>   
>  Thank you very much for your help.
>   
>  Best regards,
>   
>  Clarice
>
>		
>---------------------------------
> Yahoo! Acesso Grátis: Internet rápida e grátis.
>Instale o discador agora!
>
>[Non-text portions of this message have been removed]
>
>
>
>
>The primary EnergyPlus web site is found at:
>http://www.energyplus.gov
>
>The group web site is:
>http://groups.yahoo.com/group/EnergyPlus_Support/
>
>Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
>
>EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
> 
>Yahoo! Groups Links
>
>
>
> 
>
>
>
>  
>


------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/