[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] multiplier

Hi everybody,
   
  Thanks a lot for the reply about the controllers Mike!
   
  Just another quick question. The multiplier field in the zone group is used to multiply just the zone not the system is that correct?
  If I have a 20 storey residential building with typical floors and consequently typical zones each one being coolled by a fancoil unit when I set a value in the multiplier it will only multiply the zone loads not the fancoils, right? How do I "multiply" the fancoils so that I account for the energy consumption of the whole building?
   
  I was thinking to work floor by floor and then simply multiply everything at the end but I have a heat recovery unit in the roof of the building that treats all fresh air coming into the zones so I don't think work floor by floor will give me the correct result. Can anybody give me a light on that?
   
  Thanks a lot again for the help
   
  Regards,
   
  Clarice

		
---------------------------------
 Yahoo! doce lar. Faça do Yahoo! sua homepage.

[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Fair play? Video games influencing politics. Click and talk back!
http://us.click.yahoo.com/u8TY5A/tzNLAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/