[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Daylighting detailed

Hello,
  I'm doing simulations in EnergyPlus with the Daylighting: detailed. I've chose a real room. It is a Lab in the research centre. The room has 7 windows: 4 in facade north and 3 in south. The area of the zone is 56 m². 
  I've created a illuminance map with 9 points and I´ve chose two reference points in the zone. 
  And I've been doing simulations with this points in different places but in all of them I've found 6 equals values. And they are in the same places in all simulations.
  And I've had another problem, the results is showing beam radiation into the room between 10 and 12 but, indeed, the room has beam radiation in the afternoon (12 until 17). I've checked all of the input like latitude, north axis and everything is ok. 
  So, I woudl like to know what can cause these problems?
  Thank You
  Rejane

		
---------------------------------
 Yahoo! doce lar. Faça do Yahoo! sua homepage.

[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/