[EnergyPlus_Support] Disparate zones for inlet and outlet nodes for an air loop

["Elmer Morrissey" <elmofuddly@xxxxxxxxx>]

Hello all,

I am interested in simulating a building comprised of several AHUs. 

One of the AHUs services a particular loop in one area and takes 
extract from another area. It provides ventilation air to a corridor 
and lobby area. However, the return loop is extracting air from three 
toilet areas. These areas are physically separated within the building 
by 2/3 zones. Is this a problem in EnergyPlus, and do I have to 
conglomerate these disparate areas into one zone (this may be a 
problem with disparate temperature control etc)?

Kind regards

-Elmer 






The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/