[EnergyPlus_Support] Surface Triangulation Error

["civilnug" <civilnug@xxxxxxxxx>]

Hi All,

I have just updated from 1.2.3.023 to 1.2.3.031, in the earlier 
version my geometry was fine but when I ran it through the first 
time on the new version I started getting the follwing errors.

   ** Warning ** DXFOut: Could not triangulate 
surface="ZBASEGALLERYSTOREZGRDUNCONTROLLEDAREA1>O0>F", type="ROOF", 
check surface vertex order(entry)

The problem I have with this is that the surface type in question is 
CEILING and not ROOF.

Does anybody have any ideas?

Again I was not getting these errors on the previous version I was 
using.


Thank you,

John





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/