[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Vented Facade

Emanuele, 
 
Which surface temperatures of the support wall are you refering to? inside or outside?   Check what you have set for OutsideFaceEnvironment -- it should be OtherSideConditionsModel
 
Brent
 
 

-----Original Message-----
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx]On Behalf Of Emanuele Naboni
Sent: Wednesday, March 15, 2006 11:35 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Vented Facade


Hi everybody,

I'm simulting as well an opaque ventilated facade, It works and is
very intersting!
The baffle and the cavity have very realistic values.

The only problem is about the effects it does on the wall where is applied:
running a simulation with a vent facade and running another one
without vent facade gives the same temperatures on the support wall.
have anyone verify that?

I'm very intersted too in the Cd values.
Emanuele





[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/