[EnergyPlus_Support] how to define the inter-zone walls between the atrium zone and its adjacent office zone

["nicole chen" <cloris.chen@xxxxxxxxx>]

Dear all

how to define the inter-zone walls between the atrium zone and its adjacent
office zone . Should them be exterior wall or internal wall ? if it is a
internal wall, can it be set to sun exposed and wind exposed? if  it is a
exterior wall , can it be set to be adjacent to another object?

-- 
Yours
Nicole Chen


[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Check out the new improvements in Yahoo! Groups email.
http://us.click.yahoo.com/6pRQfA/fOaOAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/