[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] about 'sizing parameters'



COIL:WATER:COOLING has known problems when autosized in humid climates.  Try 
using COIL:Water:DetailedFlatCooling instead.

Mike


On 5 Sep 2006 at 8:05, hbn_pch wrote:

> Dear all,
>   I  have a doubt about the 'sizing parameters' object.I create a model 
> with sizing parameters 1.3,the zone temperature can be controlled well.
> I change the parameters to 1.4,whereas the zone is controlled so 
> bad.Then i test again and again setting parameters from 1.4 to 3.0,and 
> only when
> the parameter is 3.0,the zone can controlled well.
>   I'm puzzled.Normally,when i add the parameter,the zone design loads 
> and air flow rates will increase,then the new results will be used for 
> system
> design calculations.And it should be controlled well too.I've upload 
> the test file named 'const test.idf'.
>   Appreciated your kind explanation.Thanks
>   pch
> 
> 
> 
> 
> 
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> Attachments are not allowed -- please post any files to the appropriate folder
> in the Files area of the Support Web Site.
> 
> EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the
> "search" button.
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
> 
> 
> 


========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/