Re: [EnergyPlus_Support] Questions about the heat exchanger model in IC engine

["Michael J. Witte" <mjwitte@xxxxxxxx>]

This is the minimum exhaust gas outlet temperature that will be allowed.  Heat 
recovery from the exhaust gas will be limited so that the leaving exhaust 
temperature does not fall below this value.

Mike


On 4 Sep 2006 at 6:12, energypluser wrote:

> Dear all
> 
> I want to know whether the heat exchanger in IC engine is modeled by using
> ?-NTU method?
> There is a variable named as Design Minimum Exhaust temp. (Steam Saturation 
> Temperature). I don't know whether the temperature is the gas outlet
> temperature or the 
> water outlet temperature.
> Please give me some advise.
> 
> mac.cz
> 
> 
> 
> 
> 
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> Attachments are not allowed -- please post any files to the appropriate folder
> in the Files area of the Support Web Site.
> 
> EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the
> "search" button.
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
> 
> 


========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/