[EnergyPlus_Support] Model demostic hot water energy use

[Zhen Tian <tianzhen9@xxxxxxxxx>]

Dear All,
   
  I try to model annual demostic hot water energy use in EnergyPlus. Is there any method to model this in detail. I have looked over the examples of EnergyPlus. It seems that one example has a very simple example which simulate enegy use based on hot water flow rate and water temperature.
   
  Could somebody tell me weather I can simulate demostic hot water enegy use similar to that in DOE-2? Thanks for all suggestions. If somebody has an example, could you let me know.
   
  Thanks a lot.
   
  Regards,
   
  Zhen Tian

 		
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls.  Great rates starting at 1¢/min.

[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/