[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Slat angle control



In your WindowShadingControl object, you have the Shading Control Type 
field set to AlwaysOn, the Shading Control is scheduled field set to NO, 
and no Schedule Name.

Rob Hitchcock
==========
leeslwong wrote:

> Dear all,
>
> I am simulating a window with vertical window blind with slag angle
> control. The slat angle will be varied with the preset schedule. But
> I found the results showing the window blind are always close. The
> input data are shown on the followings. Anyone can give me any
> advice on this problem.
>
> Regards,
>
> lee
>
> MATERIAL:WindowBlind,
> BLIND, !- Name
> Vertical, !- Slat orientation
> 0.1, !- Slat width {m}
> 0.09, !- Slat separation {m}
> 0.0002, !- Slat thickness {m}
> , !- Slat angle {deg}
> 0.9, !- Slat conductivity {W/m-K}
> 0.0, !- Slat beam solar transmittance
> 0.8, !- Slat beam solar reflectance, front
> side
> 0.8, !- Slat beam solar reflectance, back
> side
> 0.0, !- Slat diffuse solar transmittance
> 0.8, !- Slat diffuse solar reflectance,
> front side
> 0.8, !- Slat diffuse solar reflectance, back
> side
> 0.0, !- Slat beam visible transmittance
> 0.8, !- Slat beam visible reflectance, front
> side
> 0.8, !- Slat beam visible reflectance, back
> side
> 0.0, !- Slat diffuse visible transmittance
> 0.8, !- Slat diffuse visible reflectance,
> front side
> 0.8, !- Slat diffuse visible reflectance,
> back side
> 0.0, !- Slat IR (thermal) hemispherical
> transmittance
> 0.9, !- Slat IR (thermal) hemispherical
> emissivity, front side
> 0.9, !- Slat IR (thermal) hemispherical
> emissivity, back side
> 0.13, !- Blind-to-glass distance {m}
> 0.1 , !- Blind top opening multiplier
> 0.1 , !- Blind bottom opening multiplier
> 0.0, !- Blind left-side opening multiplier
> 0.0, !- Blind right-side opening multiplier
> 5, !- Minimum Slat Angle {deg}
> 175; !- Maximum Slat Angle {deg}
>
> Construction,
> Sgl Green 6mm with blind, !- Name of construction with
> shade
> GREEN 6MM, !- Layer #1
> BLIND; !- Layer #2
>
> WindowShadingControl,
> shading_control, !- Name of shading control
> InteriorBlind, !- Shading Type
> Sgl Green 6mm with blind, !- Name of construction with
> shading device
> AlwaysOn, !- Shading Control Type
> , !- Schedule Name
> , !- Setpoint {W/m2}
> NO, !- Shading Control is
> scheduled
> NO, !- Glare Control is
> active (default)
> , !- Material Name of
> shading device
> ScheduledSlatAngle, !- Type of slat angle
> control for blinds
> Blind_sch_B; !- Slat angle schedule
> name
>
> ScheduleType,
> blind_sch, !- ScheduleType Name
> 0:180, !- range
> CONTINUOUS; !- Numeric Type
>
> SCHEDULE:COMPACT,
> Blind_sch_B, !- Name
> blind_sch, !- ScheduleType
> Through: 12/31, !- Complex Field #1
> For: alldays, !- Complex Field #2
> Until: 10:00, !- Complex Field #3
> 160, !- Complex Field #4
> Until: 15:00, !- Complex Field #5
> 45, !- Complex Field #6
> Until: 24:00, !- Complex Field #7
> 160; !- Complex Field #8
>
>  




[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/