[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Slat angle control
Dear all,
I am simulating a window with vertical window blind with slag angle
control. The slat angle will be varied with the preset schedule. But
I found the results showing the window blind are always close. The
input data are shown on the followings. Anyone can give me any
advice on this problem.
Regards,
lee
MATERIAL:WindowBlind,
BLIND, !- Name
Vertical, !- Slat orientation
0.1, !- Slat width {m}
0.09, !- Slat separation {m}
0.0002, !- Slat thickness {m}
, !- Slat angle {deg}
0.9, !- Slat conductivity {W/m-K}
0.0, !- Slat beam solar transmittance
0.8, !- Slat beam solar reflectance, front
side
0.8, !- Slat beam solar reflectance, back
side
0.0, !- Slat diffuse solar transmittance
0.8, !- Slat diffuse solar reflectance,
front side
0.8, !- Slat diffuse solar reflectance, back
side
0.0, !- Slat beam visible transmittance
0.8, !- Slat beam visible reflectance, front
side
0.8, !- Slat beam visible reflectance, back
side
0.0, !- Slat diffuse visible transmittance
0.8, !- Slat diffuse visible reflectance,
front side
0.8, !- Slat diffuse visible reflectance,
back side
0.0, !- Slat IR (thermal) hemispherical
transmittance
0.9, !- Slat IR (thermal) hemispherical
emissivity, front side
0.9, !- Slat IR (thermal) hemispherical
emissivity, back side
0.13, !- Blind-to-glass distance {m}
0.1 , !- Blind top opening multiplier
0.1 , !- Blind bottom opening multiplier
0.0, !- Blind left-side opening multiplier
0.0, !- Blind right-side opening multiplier
5, !- Minimum Slat Angle {deg}
175; !- Maximum Slat Angle {deg}
Construction,
Sgl Green 6mm with blind, !- Name of construction with
shade
GREEN 6MM, !- Layer #1
BLIND; !- Layer #2
WindowShadingControl,
shading_control, !- Name of shading control
InteriorBlind, !- Shading Type
Sgl Green 6mm with blind, !- Name of construction with
shading device
AlwaysOn, !- Shading Control Type
, !- Schedule Name
, !- Setpoint {W/m2}
NO, !- Shading Control is
scheduled
NO, !- Glare Control is
active (default)
, !- Material Name of
shading device
ScheduledSlatAngle, !- Type of slat angle
control for blinds
Blind_sch_B; !- Slat angle schedule
name
ScheduleType,
blind_sch, !- ScheduleType Name
0:180, !- range
CONTINUOUS; !- Numeric Type
SCHEDULE:COMPACT,
Blind_sch_B, !- Name
blind_sch, !- ScheduleType
Through: 12/31, !- Complex Field #1
For: alldays, !- Complex Field #2
Until: 10:00, !- Complex Field #3
160, !- Complex Field #4
Until: 15:00, !- Complex Field #5
45, !- Complex Field #6
Until: 24:00, !- Complex Field #7
160; !- Complex Field #8
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.idf and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/