[EnergyPlus_Support] one problem

[kir kumar <kirank209@xxxxxxxxxxx>]

Dear all,
             I am simulating a huge building with seven floors and each floor is having two zones(east zone and west zone).
  
           I ran a simulation of my building in which the internal loads are same on all floors. I took the average value for total water cooling coil load of all the middle floors(both on east side zones & west side zones). This value(total cooling coil load for a typical middle floor) is higher than the total cooling coil load of top floor. Since the roof of top floor is exposed to solar radiation, the top floor  must have a cooling  coil load higher than that of a typical middle floor. But why the coil load for typical middle floor is higher than that of top floor?
  I verified my idf file but cannot figure out the mistake.
  I uploaded my idf file in Files > Problem_Submittals > kiran-folder . The name of the idf file is "kiran.idf". Please go through it.
Please help me.
  
Thanks in advance
kiran

 				
---------------------------------
 Find out what India is talking about on  - Yahoo! Answers India 
 Send FREE SMS to your friend's mobile from Yahoo! Messenger Version 8. Get it NOW

[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/