[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] File conversion V1-3 to V1.4
I ran "Transition Version" from the EP-Launch File menu to convert
one of my old models into V1.4. The utility program did run OK (as
far as can tell), but the following message is displayed every time
I try to run a simulation with the subject model:
"The file: "....." is an old version (1.3.0). To update the file to
the latest version, use THE TRANSITION VERSION option under the FILE
menu. Proceed with simulation using old version?"
Repeating the "TRANSITION VERSION" command results in the following
Transition error message: "Since the IDFOLD file already exists, no
translation will be performed".
Is there anything else I need to do besides running the "TRANSITION
VERSION" option from the FILE menu? How can I tell if a model has
been transitioned into the latest version or not?
Thank you for your support.
Merid
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.idf and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/