[EnergyPlus_Support] about the cooling tower

["dreamerfish8146" <dreamerfish8146@xxxxxxxxxxxx>]

Dear all:
    The system of this simulation is fancoil.There are three water 
cooled chillers and three cooling towers.One condenser pump in the 
supply side.The chiller branch is composed of a chiller and a cw 
pump.In winter, purchased heating is used.There are many warnings in 
the .err file which is 
  ** Warning ** COOLING TOWER:SINGLE SPEED- "TOWER1":
 **   ~~~   **  Condenser Minimum Loop Mass Flow is greater than 
Condenser Maximum Loop Mass Flow
 **   ~~~   **  Minimum Loop Mass Flow has been reset to Maximum Loop 
Mass Flow
I changed all the related parameters to autosize but there is no 
change.Is there something wrong about the water loop? Or the parameters 
are wrong?
    Thanks for help!



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/