[EnergyPlus_Support] Zero flow in HW pri-sec loop with Water Heater: Mixer

["miaoworld" <eric.yang@xxxxxxxxxxxxxx>]

Hi,

I have experiencing zero flow for the primary heating water loop, 
though I have flow for the secondary heating water loop.   The water 
heater is also having zero flows.

I understand the water heater object is completely passive, but don't 
know how to solve the zero flow issues.

Thanks in advance for your suggestions. I have uploaded the 
file "5ZoneVAV-Pri-SecLoop-hotwater-zeroflow.zip".

Eric (Miao)





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/