[EnergyPlus_Support] EPlus Simple Model

["cienty1" <joseb@xxxxxxxxxxxx>]

Hello everyone, I am currently working on my master's project which 
involves the use of eplus. I have made a simple model of one wall to 
compare it with manual calculations but I have found I lack the 
following information.

1- Is there a variable that contains the external heat gain for a 
surface? or better yet is there a list of advance variables (like heat 
gains, CTF coefficients, etc.?

2- If I turn off wind and sun for the surface is there any other heat 
gain variable other than UAdeltaT(db)? (I am trying to do a simple 
UAdetaT model).

Thanks.




------------------------ Yahoo! Groups Sponsor --------------------~--> 
Check out the new improvements in Yahoo! Groups email.
http://us.click.yahoo.com/4It09A/fOaOAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/