[EnergyPlus_Support] Sources contribution

["alberto" <ahneto@xxxxxx>]

Dear Sir,

I am trying to make an analysis of the contribution of each heat gain sources in a building and I would like to know which variables Ishould put on the Report menu. I tried the following: Zone People Total Heat Gain, Lights Total Heat Gain, Electric Equipment Total Heat Gain and Window AC Total Zone Cooling Energy(I am studying a building with a window air conditioners).
But as the first variables are heat gain , there is a delay between them and the cooling load at window AC  so if I want to check the contribution hour by hour it is possible to do an energy balance properly. Do you have any suggestions?

Sincerely,


Alberto Hernandez Neto

[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/