[EnergyPlus_Support] VAV system modeling?

["love9787m" <love9787m@xxxxxxxxxxx>]

Hi!
I'm currently modeling VAV system and DOAS to find out the difference
between those two system and enery consumption.
So, I already finished the Model of DOAS, but some problems of VAV 
system arised.
The error message is below;
Severe  ** Node ZONE 25 INLET NODE connects to no component
   **   ~~~   ** Occurs in Supply Air Path=TERMREHEATSUPPLYPATH
   **   ~~~   ** Check the connection to a CONTROLLED ZONE EQUIP 
CONFIGURATION object
   ** Severe  ** An outlet node in  Air Primary Loop TYPICAL TERMINAL 
REHEAT 1 is not connected to any zone
   **   ~~~   ** Could not match ZoneEquipGroup Inlet Node="ZONE 
EQUIPMENT INLET NODE" to any Supply Air Path or controlled zone

Despite assistance from the example file, I cannot find out a cause of 
those problem.
 
Please help!



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/