Re: [EnergyPlus_Support] Zone Outside Air Flow Type

["Michael J. Witte" <mjwitte@xxxxxxxx>]

The "sum" option is available and active in version 2.0.0.025.  Perhaps you're 
opening an old version of IDF Editor by mistake?  Check the version number 
shown near the lower left corner of the IDF Editor window.

Mike


On 17 Apr 2007 at 18:59, aboyemeplus wrote:

> The "Zone Design Load Calculation" section in the Engineering 
> Reference talks about the "sum" Outside Air Method. This method is not 
> a selection in the ZONE SIZING object. Is there an indirect way of 
> specifying the "sum" Outside Air Method, or is this a feature that 
> won't be availble until some future release?


========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/