[EnergyPlus_Support] Re: Window AC or Unitary

["ooikoonbeng2004" <kooi@xxxxxxxxxxxxxxxx>]

Hi everyone, 

As scheduled, i have modelled B039.idf for this experiment, which i 
shall split into two stages. The first stage is to validate the 
building envelop and the heat transfer dynamics and steady states. 

i ran into an error i cannot solve. Though my idf file does not 
have "design day" in the zone sizing class, the .err file 
consistently shows this "design day". Can i upload my B039.idf?

i have 8 thermocouples on the surfaces and subsurfaces of zone 1 of 
this three zone building. i have 1 thermocouple on the other side of 
the partition with zone 2 plus 1 in the center of the room plus 1 in 
a globe in the center of the room, for the MRT. 

Any advice would be appreciated. Much obliged,
ooi 

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "ooikoonbeng2004" 
<kooi@...> wrote:
>
> Thank you to Shirley for the DXCoolingCoilBypassEmpirical. i shall 
use 
> the 5 empirical quads and biquads in the WindAC file. Many thanks. 
ooi
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "ooikoonbeng2004" 
> <kooi@> wrote:
> >
> > i have been asked to verify (and validate?) E+ simulation 
results by 
> > taking actual measurements with anemometer (for air flow rates), 
> > temperature sensors, maybe including RH sensors, if available, 
in a 
> > room air conditioned, cooling only, by a York or Carrier split 
> > (evaporator inside the room and air cooled condensor outside the 
> room) 
> > air conditioner and a ELE weather station in a tropical climate. 
> > 
> > i plan to do this from 16th to 20th April this year. There is a 
> Window 
> > AC example and a Unitary equipment class. Which one is more 
> > appropriate to this split type of airconditioner? Any advice 
from 
> > developers in this typer of work would be most welcomed. Many 
Thanks.
> >
>




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/