[EnergyPlus_Support] Questions About the Variables Needed to Check Sensible Cooling Rate.

["xjtu.guowei" <xjtu.guowei@xxxxxxxxx>]

Dear All:

After my simulations, I found that the results about zone/system
sensible cooling rates were sort of weird. But I don't know how to get
the following data(hourly):

1. Zone heat conduction through opaque surfaces( for each zone
totally,not for each surface seperately);

2. Zone infiltration latent heat gain(not sensible heat gain);

3. Is "zone mechanical ventilation cooling load increase" the sum of
zone ventilation sensible and latent heat gains? And how to output
zone ventilation sensible/latent heat gains?

4. Zone/system latent cooling rate;

Thank you very much in advance.

Wei






 Thank you in advance.



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/