Re: [EnergyPlus_Support] Questions About the Variables Needed to Check Sensible Cooling Rate.

["Michael J. Witte" <mjwitte@xxxxxxxx>]

1.  Not available.

2.  Not available.

3.  "Zone Mechanical Ventilation . . ." report variables report total loads 
(sensible plus latent).  Separate sensible and latent report variables are not 
available.  Understand that the Zone Mecahnical Ventilation report variables 
are approximate calculations for reporting purposes only.  These values are not 
acually used in computing the coil loads.

4.  Not available.  The sensible and latent loads on the cooling coil are 
reportable.  
Please note that most report variables are defined in the Input Output 
Reference.  Search for the variable name to find the definition.

Mike


On 23 Apr 2007 at 7:00, xjtu.guowei wrote:

> Dear All:
> 
> After my simulations, I found that the results about zone/system
> sensible cooling rates were sort of weird. But I don't know how to get
> the following data(hourly):
> 
> 1. Zone heat conduction through opaque surfaces( for each zone
> totally,not for each surface seperately);
> 
> 2. Zone infiltration latent heat gain(not sensible heat gain);
> 
> 3. Is "zone mechanical ventilation cooling load increase" the sum of
> zone ventilation sensible and latent heat gains? And how to output
> zone ventilation sensible/latent heat gains?
> 
> 4. Zone/system latent cooling rate;
> 
> Thank you very much in advance.
> 
> Wei
> 
> 
> 
> 
> 
> 
>  Thank you in advance.
> 
> 
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> Attachments are not allowed -- please post any files to the appropriate folder
> in the Files area of the Support Web Site.
> 
> EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the
> Documentation link and press the "search" button.
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 


========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/