[EnergyPlus_Support] Conflicting output reports

["aboyemeplus" <Merid.Aboye@xxxxxxxxxxxxxx>]

Hi all,

I am having a hard time reconciling the values of the following 
variables as listed in the .EIO output file and the .CSV files. 

1) Zone Peak Temperature and Specific Humidity

In the "Zone Sizing" section of the .EIO file, listed peak zone 
temperature and specific humidity values are as high as the outdoor 
Summer design conditions. On the other hand, the peak Zone 
temperature and specific humidity values from Report Variable 
reflect the fact that that there is temperature control in the 
model, and are much lower than the values listed in the .EIO output. 
Hopefully, Peak temperature/humidity in .EIO and Report Variable 
don't have the same meaning!  If so, can you please explain the 
significance/meaning of the variables in the two reports?

2) AHU-1 Rated Total Cooling Capacity (gross) [W]

In the "Component Sizing" section of the .EIO file, the value 
corresponding to this variable is listed at 8.816 kW. The peak total 
cooling capacity from Report Variable is about 10.6 kW. Again, why 
the difference?  Which report is accurate if the variables have the 
same meaning in both reports?

I have uploaded the input file "p599adm-exp-4-23.IDF" into the 
\problem_submittals\ folder. 

Thank you for your support.

Merid




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/